Eddy current flaw detectors KONSTANTA Constant VD1 , etc .
Eddy current flaw detectors are designed to detect and assess the depth of surface cracks in ferro- and non-ferromagnetic metals and alloys; to detect subsurface defects in non-ferromagnetic metals and alloys.
Standard transducers are designed to detect surface cracks of small extent.
Specialized converters for aviation are designed to detect cracks in a sheet of aluminum alloy metal of the second layer under a defect-free sheet of aluminum alloy metal.
Differential eddy current converters are designed to control the edge of the trough of the blade pen.
The transducers are designed to detect defects in extended objects, such as rods, tubes, etc. It is possible to control objects of non-circular cross-section, for example, strips, oval radiator tubes, square pipes, hexagonal rods, etc.
Control samples are designed to check the operability, setting the sensitivity threshold, calibration and verification of eddy current flaw detectors.
Converters and carriages for detecting cracks in the thread are designed to check the operability, set the sensitivity threshold, calibration and verification of eddy current flaw detectors.
Accessories and devices for converters to the Constant VD1 flaw detector are designed to detect and measure the size of cracks in the cavity of the external or internal locking thread of drilling equipment.
The device of automated eddy current thread control is designed to detect defects such as cracks in the cavity of external and internal threads in automated mode, disassembly of couplings, pipes and other products weighing up to 36 kg.
Models: Constant VD1, Constant CS.
- Constant VD1. Technical characteristics.
- Constant VD1 Aviation. Technical specifications.
- A kit for monitoring the lock thread of drilling equipment. Technical specifications.
- Constant VD1 for control of soldered connections. Technical specifications.
- Kit for thread control of shafts, studs and nuts of pumping and compressor equipment (in accordance with SRT 03-001-12). Technical specifications.
- Constant CS. Technical specifications.
Standard transducers are designed to detect surface cracks of small extent.
Models: PF-ON-14-Fe, PF-ON-4-Fe, PF-ON-4-Al, PF-ON-4-Ti, PF-C2-4-Fe, PF-C2-4-Al, PF-C2-4-Ti, PF-G1-4-Fe, PF-G1-4-Al, PF-G1-4-Ti, PF-G2-4-Fe, PF-G2-4-Al, PF-G2-4-Ti.
Specialized converters for aviation are designed to detect cracks in a sheet of aluminum alloy metal of the second layer under a defect-free sheet of aluminum alloy metal.
Models: PF-GT-6e-Al, PF-GT-18e-Al, PF-G2GT-6e-Al, PF-C1E-6-Al.
Differential eddy current converters are designed to control the edge of the trough of the blade pen.
Models: PAD-TL (1-K)-8, PAD-TL (1-C)-8, PAD-TL (G2-C)-8, PAD-TL (G2-K)-8.
The transducers are designed to detect defects in extended objects, such as rods, tubes, etc. It is possible to control objects of non-circular cross-section, for example, strips, oval radiator tubes, square pipes, hexagonal rods, etc.
Models: PF-PR-xx, PF-ON-18e-U2, PF-RS1-35-U2, FD-UKM.
- Through-pass converters. Technical specifications.
- Converters for monitoring welds. Technical specifications.
Control samples are designed to check the operability, setting the sensitivity threshold, calibration and verification of eddy current flaw detectors.
Models: KMMD 21.
Converters and carriages for detecting cracks in the thread are designed to check the operability, set the sensitivity threshold, calibration and verification of eddy current flaw detectors.
Models: PF-R1-0,5x3-Fe with carriage KKT-1, PF-R2-0,5x3-Fe with carriage KKT-2, PF-R3-0,5x2-Fe with carriage KST-1, etc.
Accessories and devices for converters to the Constant VD1 flaw detector are designed to detect and measure the size of cracks in the cavity of the external or internal locking thread of drilling equipment.
Models: NKr-1, NCP-P-2, etc.
The device of automated eddy current thread control is designed to detect defects such as cracks in the cavity of external and internal threads in automated mode, disassembly of couplings, pipes and other products weighing up to 36 kg.
Models: UKR-VT1.
All KONSTANTA products
Electronic, mechanical and ultrasonic thickness gauges, control devices and devices, hardness testers, magnetic and eddy current flaw detectors, equipment for micro/nano mechanical measurements and tests, electrical conductivity meters
-
Optical controlConstant VIC et al . -
Preparation devicesConstant Z1 , etc . -
Management systemsMachines, apparatuses, etc. -
Thermographic systemsc IR sensor, etc. -
Electrochemical protection devicesConstant IP1 , etc . -
Electrical conductivity metersConstant K6 , etc . -
Control systemsConstant-KPT, etc. -
Eddy current flaw detectorsConstant VD1 , etc . -
Micro/nanohardomersfrom 0.01 to 100 microns, etc. -
Magnetic flaw detectorsThe MFL constant , etc . -
Hardness testersTD, TS, etc. -
Monitoring devicesWITH 153-34.17.740-2003, etc. -
Ultrasonic thickness gaugesBulat 1S, Bulat 3, etc. -
Input control devicesConstant VZT, BMC, etc. -
Coating control devicesAC, AR, USH, KN, etc. -
Mechanical thickness gaugesGU, GP, M, etc. -
Electronic thickness gaugesConstant K5 , etc .
About KONSTANTA
LegalThe CONSTANT company (St. Petersburg) was founded in 1993 to carry out scientific and applied research in the field of non-destructive testing of protective coatings of all types, structurally inhomogeneous materials, as well as to create competitive equipment for ultrasonic non-destructive testing of a wide class of products.
-
DEVELOPMENT AND IMPLEMENTATION
The CONSTANT company is engaged in the development and production of devices and means of non-destructive testing of materials, products and protective coatings of all types. -
priority
The company's priority is the creation and production of high-tech high-tech equipment aimed at a range of professional users. -
REPUTATION
The company has established itself as a developer and manufacturer of high-quality and modern means of manual non-destructive testing, testing of materials and products.
Information Board KONSTANTA
Learn more about our products KONSTANTA.
-
Price list for CONSTANT products -
Catalog of devices for complex control of materials and products. -
Catalog of devices for complex control of protective coatings of all types and preparation of paint and varnish materials. -
Catalog for electric spark flaw detectors. -
Catalog for multifunctional micro/nano-hardness tester with scratch testing function. -
The UZ-Constant catalog. -
Questionnaire CONSTANT
NEW TECHNOLOGIES GROUP
For sales and support please contact
Contact us or your local dealer for more information on certifications, features, reviews, pricing, stock availability and delivery terms for KONSTANTA products.
Reply guaranteed within 8 business hours!
- (7273)495-231
- (3955)60-70-56
- (8182)63-90-72
- (8512)99-46-04
- (3852)73-04-60
- (4722)40-23-64
- (4162)22-76-07
- (4832)59-03-52
- (8352)28-53-07
- (351)202-03-61
- (8202)49-02-64
- (3022)38-34-83
- (395)279-98-46
- (4932)77-34-06
- (3412)26-03-58
- (4012)72-03-81
- (4842)92-23-67
- (843)206-01-48
- (3842)65-04-62
- (4212)92-98-04
- (8332)68-02-04
- (4966)23-41-49
- (4942)77-07-48
- (861)203-40-90
- (391)204-63-61
- (3522)50-90-47
- (4712)77-13-04
- (4742)52-20-81
- (3519)55-03-13
- (495)268-04-70
- (8152)59-64-93
- (8552)20-53-41
- (831)429-08-12
- (3843)20-46-81
- (383)227-86-73
- (3496)41-32-12
- (3812)21-46-40
- (4862)44-53-42
- (3532)37-68-04
- (8412)22-31-16
- (342)205-81-47
- (8142)55-98-37
- (8112)59-10-37
- (863)308-18-15
- (4912)46-61-64
- (812)309-46-40
- (846)206-03-16
- (8342)22-96-24
- (845)249-38-78
- (8692)22-31-93
- (3652)67-13-56
- (4812)29-41-54
- (862)225-72-31
- (8652)20-65-13
- (3462)77-98-35
- (8212)25-95-17
- (4752)50-40-97
- (8482)63-91-07
- (3822)98-41-53
- (4872)33-79-87
- (4822)63-31-35
- (3452)66-21-18
- (347)229-48-12
- (3012)59-97-51
- (8422)24-23-59
- (8672)28-90-48
- (4922)49-43-18
- (423)249-28-31
- (844)278-03-48
- (8172)26-41-59
- (473)204-51-73
- (4112)23-90-97
- (4852)69-52-93
- (343)384-55-89
Send your question now: